Rig control daemon

B I U S link image code list	Show page   Syntax
[<<- RemoteQTH-server|RemoteQTH-server] Configure model and assign to USB device for network Rig control with Hamlib. [https://remoteqth.com/img/wiki-rigctld.png] * '''Model''' number find in actualy rigctld list pop-up window * '''Baudrate:''' ** 300 baud ** 1200 baud ** 2400 baud ** 4800 baud ** 9600 baud ** 19200 baud ** 38400 baud ** 57600 baud ** 115200 baud * Icom CI-V adr - only for Icom radios *'''Detect device:''' For finding id's and serial numbers USB device you can use a pop-up window [https://remoteqth.com/img/split.png] . This window print dmesg message from kernel or list usb device path of system, After plug usb device you [see preview.|https://remoteqth.com/img/wiki-ser2net-detect-usb-device.png] - '''[How to set usb device SerialNumber].''' **'''exactly by IDs (recommended) -''' connects devices that is able to clearly identify by ID and SN, typical FTDI chip. *** USB Vendor id: must have at 4 characters. *** USB Product id: must have at 4 characters. *** USB sn: must have at least 1 characters, and maximum 8 characters. **'''by relative Device path -''' connects devices that is not able to clearly identify, typical PL2303 chip. *** Device name: find and copy from pop-up window in format 'ttyUSB.#-#.(#|#-#).#'. Rig control daemon will be restart after re/plug usb device.