Remote multi rotator control

This revision is from 2014/01/13 14:43. You can Restore it.

Version 2.0

Examples

  • CDE 24V~ AC
    wire - description              - connected to
------------------------------------------------------------
1    - to GND
2    - Brake                    - pin 13 (DB15)
3    - resistor 500 ohm         - pin 14 through resistance (200 ohm) at pin 15 (DB15)
4    - capacitor                - C2
5    - CW                       - pin 7 + 8 (DB15)
6    - CCW                      - pin 3 + 4 (DB15)
7    - resistor                 - GND
8    - capacitor                - C2
------------------------------------------------------------
AC power for motor connected to PCB see image above, and pin 11+2 for brake

arduino pins connected

rotator azimuth A7
CW D6
CCW D7
CW switch A5
CCW switch A4
Brake D8
Start switch A3
CW encoder D10
CCW encoder D9
LCD 2,3,4,5,11,12
Free/unused
SW1 A0
LED SW1 D13
SW2 A6
SW3 A2
SW4 A1