Rig control daemon

This revision is from 2014/06/13 16:24. You can Restore it.

Configure model and assign to USB device for network Rig control with Hamlib.

• Model number find in actualy rigctld list pop-up window
• Baudrate:
• 300 baud
• 1200 baud
• 2400 baud
• 4800 baud
• 9600 baud
• 19200 baud
• 38400 baud
• 57600 baud
• 115200 baud
• Icom CI-V adr - only for Icom radios
• Detect device: For finding id's and serial numbers USB device you can use a pop-up window . This window print dmesg message from kernel or list usb device path of system, After plug usb device you see preview. How to set usb device SerialNumber.
• exactly by IDs (recommended) - connects devices that is able to clearly identify by ID and SN, typical FTDI chip.
• USB Vendor id: must have at 4 characters.
• USB Product id: must have at 4 characters.
• USB sn: must have at least 1 characters, and maximum 8 characters.
• by relative Device path - connects devices that is not able to clearly identify, typical PL2303 chip.
• Device name: find and copy from pop-up window in format 'ttyUSB.#-#.(#|#-#).#'.