Status page
This revision is from 2015/03/18 00:01. You can Restore it.
Shows you several major values of server.
- Build number of server software (not system), and status:
- Software up to date.
- Software is old, please update.
- ...after update show return code (done/fail).
- Mishmash - actual build > serverbuild.
- Check new build FAIL.
- Hardware detecton result based on cpuinfo (RPI table below)
- Actual grayline map with position of sun, use for rotators controll.
- Uptime - Actual time | time server up | connect users | server load
- Disk space - Filesystem | size | use | free | %
- You & server IP | DHCP on/off (1/0)
- Recognized USB devices - list connected device
- CW
- RotX
- ComX
- Rotators config overview
- Ser2Net config overview
- NTP status
RaspberryPI revision
| cpuinfo rev Code | Model | RAM |
| 0002 | Model B Revision 1.0 | 256 MB |
| 0003 | Model B Revision 1.0 + ECN0001 (no fuses, D14 removed) | 256 MB |
| 0004-6 | Model B Revision 2.0 Mounting holes | 256 MB |
| 0007-9 | Model A Mounting holes | 256 MB |
| 000d-f | Model B Revision 2.0 Mounting holes | 512 MB |
| 0010 | Model B+ | 512 MB |
| 0011 | Compute Module | 512MB |
| 0012 | Model A+ | 256MB |
| a01041 (Sony, UK) | Pi 2 Model B | .0 1GB |
| a21041 (Embest, China) | Pi 2 Model B | .0 1GB |
Update
if shown update button, your can synchonize actual version of software from RemoteQTH.com to your personal server. Only pres this button, and wait for result (displays in red).
- Can force the update by opening sites update.php on server.