Band decoder for Arduino

This revision is from 2016/01/05 23:47. You can Restore it.

← Web page | HamShop.cz version →

The hardware

Front side

  • 1-14 - green LED signalized switched relay.
  • 15-16 - non used outputs.
  • white square - sign defines the type of equipment.

Back side

  • DATA - RJ45 input data connector for Band decoder
    1. - TXD (UART/232 dependency internal switch).
    2. - GND.
    3. - RXD (UART/232 dependency internal switch).
    4. - BCD-1 input.
    5. - BCD-2 input.
    6. - +5V DC power supply.
    7. - BCD-3 input.
    8. - BCD-4 input.
  • USB - +5V DC POWER supply, or upload arduino firmware.
  • ETHERNET - not used.
  • OUTPUTS - 14 relay outputs and GND.

How to connect Power

  • plug power via usb mini cable to AC adapter, computer or usb HUB

TRX preset

ICOM ACC(2) voltage

Hardware

  • short JP3

Software

  • uncommented
    #define ICOM_ACC
  • calibrate voltage in icom_acc.h

ICOM CAT CIV

Hardware

  • short JP1 JP2

Software

  • NOT IMPLEMENTED YET

Yaesu BCD

Hardware

  • all open

Software

  • uncommented
    #define YAESU_BCD
  • optionaly set BCD matrix in yaesu_bcd.h

Kenwood CAT

Sniff mode

Comunicate trx only with banddecoder

Firmware

Source code need configure in three steps

1. Select Inputs

  • SERIAL terminal
  • ICOM ACC voltage

. ICOM CI-V (optionally sniff mode)

. KENWOOD - CAT (optionally sniff mode)

  • YAESU BCD

2. choose settings

3. Preset Band to output matrix

In default settings Band-1 corresponds to Relay-1, etc. You can sets any combination outputs for each band separate. With change zeros and ones in Matrix table. Band-0 reserved for out of range inputs measure.

        Band 0 --> */ { 0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0 }, /*  if inputs out of range
\       Band 1 --> */ { 1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0 }, /*
 \      Band 2 --> */ { 0,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0 }, /*
  \     Band 3 --> */ { 0,  0,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0 }, /*
   \    Band 4 --> */ { 0,  0,  0,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0 }, /*
    \   Band 5 --> */ { 0,  0,  0,  0,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0 }, /*
     \  Band 6 --> */ { 0,  0,  0,  0,  0,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0 }, /*
IN    ) Band 7 --> */ { 0,  0,  0,  0,  0,  0,  1,  0,  0,  0,  0,  0,  0,  0,  0 }, /*
     /  Band 8 --> */ { 0,  0,  0,  0,  0,  0,  0,  1,  0,  0,  0,  0,  0,  0,  0 }, /*
    /   Band 9 --> */ { 0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  0,  0,  0,  0,  0 }, /*
   /    Band 10 -> */ { 0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  0,  0,  0,  0 }, /*
  /     Band 11 -> */ { 0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  0,  0,  0 }, /*
 /      Band 12 -> */ { 0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  0,  0 }, /*
/       Band 13 -> */ { 0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  0 }, /*
        Band 14 -> */ { 0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0 }, /*
                        |   |   |   |   |   |   |   |   |   |   |   |   |   | 
                        V   V   V   V   V   V   V   V   V   V   V   V   V   V   
                     -----------------------------------------------------------
                     |  1   2   3   4   5   6   7   8   9  10  11  12  13  14  |
                     -----------------------------------------------------------
                                                 OUTPUTS

← Web page | HamShop.cz version →