RX antenna - Bi-directional 2-wire beverage ONE coax output

KIT - all parts you need

The drill drawing

Paste the drawing on the box and fix it with some tape.

Drill 3 or 3,2mm holes for connector.

Drill 4mm holes for antenna screws.

Bend the screw heads into box

- use 6mm drill and do it slowly by hand

Insert the screws

Insert stainless screws 4mm with

Mount the RF connector

insert connector and use steinless M3x8 and one M3x10 with grounding eye.

Drill the hole for the PCB holder

Front side

Front side

Front side

Front side

Front side

Front side

Front side

Front side

Front side

Front side

Front side

Front side

Front side

Front side

Front side

Front side

Front side

Front side

Front side

Front side

Front side

Front side

Front side

Front side

Front side

Front side

Front side

Front side

Front side