IP Switch with ESP32-GATEWAY

This revision is from 2017/12/09 11:59. You can Restore it.

This kit worked with ESP32-GATEWAY Ethernet/WiFi module from OLIMEX. Below step by step assembly manual for 16 outputs (two boards).

  1. Schematics
  2. Firmware on GitHub

Top side

❏ Solder 2x12 1k rezistors R1-R14

2x10 100n capacitors C19-C35

2x8 LED diodes D38-D45

One BCD ID switch P6 on LEFT board

One female pin header P5 on LEFT board

One male pin header P4 on RIGHT board

2x 74HC595 IO U8

2x DIP socket for U5

2x male 2x3 pin header P2

2x male 2x7 pin header P3

Bottom side

One DC jack J1 on LEFT board

One male 1x20 pin header P1 on LEFT board

ESP32-GATEWAY board

One femmale 1x20 pin header CON1 on TOP side OLIMEX ESP32-GATEWAY