RX - Bias Tee AC DC BOX

This revision is from 2021/03/07 17:15. You can Restore it.

Hlavní strana Poslední změny

<<- Web page

A bias tee is used to insert AC or DC power into an HF signal to power remote antenna pre-amplifiers (DC), Bi-directional beverages (AC) or other devices. It is usually positioned at the receiving end of the coaxial cable to pass AC or DC power from an external source to the coaxial cable running to powered device. A bias tee consists of a feed inductor to deliver AC/DC to a connector on the device side and a blocking capacitor to keep power supply from passing through to the receiver. Bias tees are used in a variety of applications, but are generally used to provide an RF signal and power to a remote device where running two separate cables would not be advantageous. This box offers something more like: protections, variable attenuator and input common-mode filter.

Applications

  • Providing an RF signal and (AC/DC) power to a remote device over one coax
  • You can use bias tee on both sides as AC/DC IN and OUT from RF coax
  • great for RX preamp BOX: Web page
  • Bi-dir beverage direction switch Web page
  • 4-way Bi-dir beverage antenna over one coax [Web page|hhttps://remoteqth.com/4-way-switch.php]

Schematic

Board

Settings

  • Variable Attenuator set to 10dB:

hight resolution

  • RF protection:

hight resolution