Rig control daemon
Configure model and assign to USB device for network Rig control with Hamlib.
- Model number find in actualy rigctld list pop-up window
- Baudrate:
- 300 baud
- 1200 baud
- 2400 baud
- 4800 baud
- 9600 baud
- 19200 baud
- 38400 baud
- 57600 baud
- 115200 baud
- Icom CI-V adr - only for Icom radios
- Detect device: For finding id's and serial numbers USB device you can use a pop-up window . This window print dmesg message from kernel or list usb device path of system, After plug usb device you see preview. - How to set usb device SerialNumber.
- exactly by IDs (recommended) - connects devices that is able to clearly identify by ID and SN, typical FTDI chip.
- USB Vendor id: must have at 4 characters.
- USB Product id: must have at 4 characters.
- USB sn: must have at least 1 characters, and maximum 8 characters.
- by relative Device path - connects devices that is not able to clearly identify, typical PL2303 chip.
- Device name: find and copy from pop-up window in format 'ttyUSB.#-#.(#|#-#).#'.
Rig control daemon will be restart after re/plug usb device.