Main page
Recent changes
Ser2Net
New name
B
I
U
S
link
image
code
list
Show page
Syntax
{TOC} {.redka#id color: #f23f37;}This function has hardware limits, because the power of Ethernet on RaspberryPI is limited connecting via usb...{/} Serial to Network Proxy (ser2net) provides a way for a user to connect from a network connection to a serial port (usb to serial converter). !What you need [http://remoteqth.com/img/wiki-s-ser2net0.png|right] * USB to RS232 or UART converter (server side) * Virtual serial ports software (client) [http://remoteqth.com/img/wiki-s-ser2net.png] Ser2Net page setting '''up to 8''' RS232 or UART serial lines export to IP. {.redka#id color: #f23f37;}'''Every USB interface must have a different serial number, to uniquely identify the server!'''{/} {.redka#id color: #f23f37;}After set this form you can repluged your usb device or reboot server, for detection new USB rotator interface.{/} !Configure com ports You can enable up to '''eight''' ports, or disable. * '''Connected device name:''' can have maximum 25 characters (not required). * '''Export on IP port:''' IP port com1 value must be from 101 to 65535. * '''Baudrate:''' ** 300 baud ** 1200 baud ** 2400 baud ** 4800 baud ** 9600 baud ** 19200 baud ** 38400 baud ** 57600 baud ** 115200 baud * '''Databits:''' ** 7 ** 8 * '''Stopbit:''' ** 1 ** 2 * '''Parity:''' ** Even ** Odd ** None * '''USB Vendor id:''' must have at 4 characters. * '''USB Product id:''' must have at 4 characters. * '''USB sn:''' must have at least 1 characters, and maximum 8 characters. [http://remoteqth.com/img/wiki-s-ser2net1.png] For finding id's and serial numbers USB device you can use a pop-up window [http://remoteqth.com/img/split.png] on top of page. This window print dmesg message from kernel of system, After plug usb device you see [http://remoteqth.com/img/wiki-dmesg.png] *'''[How to set usb device SerialNumber]''' !How To Connect to ser2net from Windows - connect with hardware COM port on client side !!Variant one - cmd Download file com2tcp from http://sourceforge.net/projects/com0com/files/?source=navbar Move to folder, and run in cmd: {{com2tcp.exe --ignore-dsr --baud 57600 \.\COM6 192.168.11.80 11001 }} * where COM6 is destination client port * IP and port Server side After connect: {{C:\Users\honza\Desktop\com2tcp-1.3.0.0-386>com2tcp.exe --ignore-dsr --baud 57600 \.\COM6 192.168.11.80 11001 OpenC0C("\.\COM6", baud=57600, data=8, parity=no, stop=1) - OK Connect("192.168.11.80", "11001") - OK InOut() START DSR is OFF }} !!Variant two - GUI [wxLcbSerialNetwork (GUI)|http://sk3w.se/sm7lcb/remote/part_wx-serial-network/index.htm] !How To Connect to ser2net from Windows - Virtual Serial Port [VSP|http://new.hwg.cz/download/sw/version/hw-vsp3-single_3-1-2.exe]
Password
Summary of changes