Ser2Net

What you need

• USB to RS232 or UART converter (server side)
• Virtual serial ports software or socat script on raspberry (client)

Configure com ports

Ser2Net page setting up to 8 RS232 or UART serial lines export to IP. Every USB interface must have a different serial number, to uniquely identify the server (recommended), or identify by relative device path - depends on the overall configuration of a USB hub, after change any part can be changed. After set this form you can repluged your usb device or reboot server, for detection new USB rotator interface.

The individual settings:

• Number of COM's select up to eight ports, or disable.
• Connected device name: can have maximum 25 characters.
• Export on IP port: IP port com1 value must be from 101 to 65535.
• Baudrate:
• 300 baud
• 1200 baud
• 2400 baud
• 4800 baud
• 9600 baud
• 19200 baud
• 38400 baud
• 57600 baud
• 115200 baud
• Databits:
• 7
• 8
• Stopbit:
• 1
• 2
• Parity:
• Even
• Odd
• None

• Detect device: For finding id's and serial numbers USB device you can use a pop-up window . This window print dmesg message from kernel or list usb device path of system, After plug usb device you see preview. How to set usb device SerialNumber.
• exactly by IDs (recommended) - connects devices that is able to clearly identify by ID and SN, typical FTDI chip.
• USB Vendor id: must have at 4 characters.
• USB Product id: must have at 4 characters.
• USB sn: must have at least 1 characters, and maximum 8 characters.
• by relative Device path - connects devices that is not able to clearly identify, typical PL2303 chip.
• Device name: find and copy from pop-up window in format 'ttyUSB.#-#.(#|#-#).#'.

Connect to ser2net from Linux

sudo socat TCP4:192.168.11.80:11001 /dev/anycom0,raw,echo=0

How To Connect to ser2net from Windows

com2tcp.exe --ignore-dsr --baud 57600 \.\COM6 192.168.11.80 11001 

C:\Users\honza\Desktop\com2tcp-1.3.0.0-386>com2tcp.exe --ignore-dsr --baud 57600
 \.\COM6 192.168.11.80 11001
OpenC0C("\.\COM6", baud=57600, data=8, parity=no, stop=1) - OK
Connect("192.168.11.80", "11001") - OK
InOut() START
DSR is OFF