Installation

B I U S link image code list	Show page   Syntax
{TOC} [<<- RemoteQTH-server|RemoteQTH-server] !From SD card image for RaspberryPI [Download|https://remoteqth.com/remoteqth-server.php#download] Image file and write to SD card - more [here|https://elinux.org/RPi_Easy_SD_Card_Setup] Server default set to '''DHCP enable''' * web interface login ''''yourcall'''' and password ''''1234'''' * server ip address see from console {{ifconfig}} and read IP address eth0 device (edge0 is vpn device). * alternative install [Fing|https://play.google.com/store/apps/details?id=com.overlook.android.fing&feature=search_result#?t=W251bGwsMSwxLDEsImNvbS5vdmVybG9vay5hbmRyb2lkLmZpbmciXQ..] to you android phone and find Raspberry device in your private site. Options: * '''boot''' with HDMI display and usb keyboard * login as '''pi''' to shell with password '''raspberry''' * run {{sudo raspi-config}} and set '''expand_rootfs'''. !From rsync repository (RaspberryPi) List of commands for Raspian wheezy after ssh login or local access from console as root (without warranty). This commands also use '''on other system''' with small changes, '''dependency to hardware.''' *'''On any other linux system change use name pi to your username.''' !!Install need package {{ sudo su echo 'remoteqth' > /etc/hostname apt-get install htop iftop mc vim screen apache2 php5 libhamlib2 libhamlib-utils rsync i2c-tools ser2net python-smbus n2n cwdaemon xplanet xplanet-images rcconf imagemagick gnuplot libqrencode3 libqrencode-dev php5-gd ntp bc socat tucnak2 locate telnet }} !!Download RemoteQTH server repository {{ mkdir /home/pi/remoteqth chown pi:pi /home/pi/remoteqth/ rsync -rva --numeric-ids --delete rsync://remoteqth.com:55873/server/ /home/pi/remoteqth/ }} !! Kernel parameters for fixing USB problems at the beginning of the file '''/boot/cmdline.txt''' add parameter {{dwc_otg.fiq_fix_enable=0}} !!File access {{ echo '/home/pi/remoteqth' > /etc/remoteqth-path chown pi:www-data /etc/remoteqth-path chmod 664 /etc/remoteqth-path chown root:www-data /etc/network/interfaces chmod 664 /etc/network/interfaces chown root:www-data /etc/resolv.conf chmod 664 /etc/resolv.conf gpasswd -a www-data gpio echo "caption always '%-Lw%{= BW}%50>%n%f* %t%{-}%+Lw%<'" >> /etc/screenrc }} !!i2c (raspberryPi only) {{ sed -i s/^blacklist\ spi-bcm2708/#blacklist\ spi-bcm2708/g /etc/modprobe.d/raspi-blacklist.conf sed -i s/^blacklist\ i2c-bcm2708/#blacklist\ i2c-bcm2708/g /etc/modprobe.d/raspi-blacklist.conf echo 'i2c-dev' >> /etc/modules }} !![apache|Installation-apache] !![visudo|Installation-visudo] !![n2n|Installation-n2n] !!gpio (RaspberryPi) {{cp /home/pi/remoteqth/script/gpio /etc/init.d/gpio chmod 774 /etc/init.d/gpio update-rc.d gpio defaults}} !!udev {{ echo ' ' > /etc/udev/rules.d/99-remoteqth.rules chown pi:www-data /etc/udev/rules.d/99-remoteqth.rules chmod 664 /etc/udev/rules.d/99-remoteqth.rules ln -s /home/pi/remoteqth/script/cwudp.service /etc/systemd/system/cwudp.service ln -s /home/pi/remoteqth/script/fskudp.service /etc/systemd/system/fskudp.service ln -s /home/pi/remoteqth/script/rig.service /etc/systemd/system/rig.service ln -s /home/pi/remoteqth/script/bd.service /etc/systemd/system/bd.service systemctl daemon-reload }} !![xplanet|Installation-xplanet] !!cwdaemon set config {{ sed -i s/DEVICE=\"parport0\"/DEVICE=\"ttyUSB.cw\"/g /etc/default/cwdaemon }} !!ser2net set access {{ chown pi:www-data /etc/ser2net.conf chmod 664 /etc/ser2net.conf }} !![Ramdisk|Installation-ramdisk] !!RaspiCam raspistill (by m1m1 » Fri May 17, 2013 12:01 pm) from git, source [2|https://www.raspberrypi.org/phpBB3/viewtopic.php?f=43&t=43990] !!Node-Red {{ apt-get install screen git nodejs npm nodejs --version ln -s /usr/bin/nodejs /usr/bin/node node --version npm install -g --unsafe-perm node-red cp remoteqth/script/node_red /etc/init.d/node_red chmod 755 remoteqth/script/node_red update-rc.d node_red defaults }} !!MQTT [https://www.switchdoc.com/2016/02/tutorial-installing-and-testing-mosquitto-mqtt-on-raspberry-pi/] !![Relay controll via LPT (Alix or any x86 platform)|Installation-ledblink] and reboot... ---- !From rsync repository (BeagleboneBlack rev C) !! connect serial debug * pinout J1{{ || || . 1 GND || . || . || . 4 RXD || . 5 TXD || . ||}} * 115200 baud ** 8 bits ** NO parity ** 1 stopbit * serial/ssh login: debian, pass: temppwd * sudo su * apt get-update && apt-get upgrade !!Install need package {{ echo 'remoteqth' > /etc/hostname apt-get install htop iftop mc vim screen apache2 php5 libhamlib2 libhamlib-utils rsync i2c-tools ser2net python-smbus n2n cwdaemon xplanet xplanet-images rcconf imagemagick gnuplot libqrencode3 libqrencode-dev php5-gd bc socat ntp }} !!Download RemoteQTH server repository {{ mkdir /home/debian/remoteqth chown debian:debian /home/debian/remoteqth/ rsync -rva --numeric-ids --delete rsync://remoteqth.com:55873/server/ /home/debian/remoteqth/ }} !!File access {{ echo '/home/debian/remoteqth' > /etc/remoteqth-path chown debian:www-data /etc/remoteqth-path chmod 664 /etc/remoteqth-path chown root:www-data /etc/network/interfaces chmod 664 /etc/network/interfaces chown root:www-data /etc/resolv.conf chmod 664 /etc/resolv.conf }} !![apache|Installation-apache] Check default ports 80 on vim /etc/apache2/ports.conf !!Disable Preloaded Services [source|https://www.element14.com/community/community/designcenter/single-board-computers/next-gen_beaglebone/blog/2013/11/20/beaglebone-web-server--setup] {{systemctl disable cloud9.service systemctl disable gateone.service systemctl disable bonescript.service systemctl disable bonescript.socket systemctl disable bonescript-autorun.service systemctl disable avahi-daemon.service systemctl disable gdm.service systemctl disable mpd.service shutdown -r now}} !![visudo|Installation-visudo] !![n2n|Installation-n2n] !![gpio (Beaglebone black rev C)|Installation-gpio-BBB] !!udev {{ echo ' ' > /etc/udev/rules.d/99-remoteqth.rules chown debian:www-data /etc/udev/rules.d/99-remoteqth.rules chmod 664 /etc/udev/rules.d/99-remoteqth.rules }} !!Xplanet open {{ vim /etc/crontab }} and paste {{ # xplanet */15 * * * * debian /home/debian/remoteqth/script/azimuth-map.sh # BBB * * * * * debian /home/debian/remoteqth/script/webcam.sh}} symlinks {{ ln -s /home/debian/remoteqth/script/.xplanet /home/debian/.xplanet mkdir /usr/share/xplanet/images ln -s /home/debian/remoteqth/script/.xplanet/images/sun.png /usr/share/xplanet/images/sun.png }} !!cwdaemon set config {{ sed -i s/DEVICE=\"parport0\"/DEVICE=\"ttyUSB.cw\"/g /etc/default/cwdaemon }} !!ser2net set access {{ chown pi:www-data /etc/ser2net.conf chmod 664 /etc/ser2net.conf }} !![Ramdisk|Installation-ramdisk] !Options !![Watchdog ping relay|Watchdog-ping]