Ser2Net
This revision is from 2013/02/04 16:09. You can Restore it.
Serial to Network Proxy (ser2net) provides a way for a user to connect from a network connection to a serial port (usb to serial converter).
What you need
- USB to RS232 or UART converter (server side)
- Virtual serial ports software (client)
Ser2Net page setting up to 8 RS232 or UART serial lines export to IP.
Every USB interface must have a different serial number, to uniquely identify the server!
After set this form you can repluged your usb device or reboot server, for detection new USB rotator interface.
Configure com ports
- Connected device name: can have maximum 25 characters (not required).
- Export on IP port: IP port com1 value must be from 101 to 65535.
- Baudrate:
- 300 baud
- 1200 baud
- 2400 baud
- 4800 baud
- 9600 baud
- 19200 baud
- 38400 baud
- 57600 baud
- 115200 baud
- Databits:
- 7
- 8
- Stopbit:
- 1
- 2
- Parity:
- Even
- Odd
- None
- USB Vendor id: must have at 4 characters.
- USB Product id: must have at 4 characters.
- USB sn: must have at least 1 characters, and maximum 8 characters.
How To Find USB Vendor/Product id's and serial numbers
same as here