Installation

This revision is from 2013/03/06 09:21. You can Restore it.

From SD card image for RaspberryPI

Download Image file and write to SD card - more here

boot with HDMI display and usb keyboard
login as pi to shell with password raspberry
run
```
sudo raspi-config
```
and set expand_rootfs, eventualy enable ssh.

Rsync repository to RaspberryPI

List of commands for Raspian wheezy after ssh login or local access from console as root (without warranty). This commands also use on other system with small changes, dependency to hardware.

Install need package

sudo su
echo 'remoteqth' > /etc/hostname
apt-get install htop iftop mc vim apache2 php5 libhamlib2 libhamlib-utils rsync i2c-tools ser2net python-smbus n2n cwdaemon xplanet rcconf imagemagick gnuplot libqrencode3 php5-gd

Download RemoteQTH server repository

mkdir /home/pi/remoteqth
chown pi:pi /home/pi/remoteqth/
rsync -rva --numeric-ids --delete rsync://192.168.1.200:55873/server/ /home/pi/remoteqth/

File access

echo '/home/pi/remoteqth' > /etc/remoteqth-path
chown pi:www-data /etc/remoteqth-path
chmod 664 /etc/remoteqth-path

chown root:www-data /etc/network/interfaces
chmod 664 /etc/network/interfaces

chown root:www-data /etc/resolv.conf
chmod 664 /etc/resolv.conf

i2c

sed -i s/blacklist\ spi-bcm2708/#blacklist\ spi-bcm2708/g /etc/modprobe.d/raspi-blacklist.conf
sed -i s/blacklist\ i2c-bcm2708/#blacklist\ i2c-bcm2708/g /etc/modprobe.d/raspi-blacklist.conf
echo 'i2c-dev' >> /etc/modules

apache

open

vim /etc/apache2/sites-available/remoteqth

and paste

<VirtualHost *:80>
	ServerAdmin webmaster@localhost

	DocumentRoot /var/www
	<Directory />
		Options FollowSymLinks
		AllowOverride None
	</Directory>
	<Directory /var/www/>
		Options Indexes FollowSymLinks MultiViews
		AllowOverride all
		Order allow,deny
		allow from all
	</Directory>

	ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
	<Directory "/usr/lib/cgi-bin">
		AllowOverride None
		Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
		Order allow,deny
		Allow from all
	</Directory>

	ErrorLog ${APACHE_LOG_DIR}/error.log

	# Possible values include: debug, info, notice, warn, error, crit,
	# alert, emerg.
	LogLevel warn

	CustomLog ${APACHE_LOG_DIR}/access.log combined
</VirtualHost>

site enable

rm /etc/apache2/sites-enabled/000-default
ln -s /etc/apache2/sites-available/remoteqth /etc/apache2/sites-enabled/001-remoteqth
ln -s /etc/apache2/mods-available/rewrite.load /etc/apache2/mods-enabled/rewrite.load
/etc/init.d/apache2 restart
rm /var/www/index.html
rmdir /var/www/
ln -s /home/pi/remoteqth/www /var/www

sudo

enter

visudo

and paste

www-data ALL = NOPASSWD: /sbin/shutdown
www-data ALL = NOPASSWD: /sbin/ifconfig
www-data ALL = NOPASSWD: /etc/init.d/ser2net
www-data ALL = NOPASSWD: /etc/init.d/n2n
www-data ALL = NOPASSWD: /usr/sbin/i2cdetect
www-data ALL = NOPASSWD: /usr/sbin/i2cget
www-data ALL = NOPASSWD: /usr/bin/rsync

n2n

open

vim /etc/init.d/n2n

and paste (configure later from web interface)

#!/bin/sh

### BEGIN INIT INFO
# Provides:        edge
# Required-Start:  $network $remote_fs $syslog
# Required-Stop:   $network $remote_fs $syslog
# Default-Start:   2 3 4 5
# Default-Stop: 
# Short-Description: Start n2n daemon
### END INIT INFO

PROGDIR="/usr/sbin"
PROGNAME="edge"

MYIP="10.0.11.173"
USR="demo"
PASSWORD="pass"
SUPERNODE="remoteqth.com"
PORT="82"

###

COMMAND="$PROGDIR/$PROGNAME -a $MYIP -c $USR -k $PASSWORD -l $SUPERNODE:$PORT -f -d edge0"

###

PATH=/bin:/usr/bin:/sbin:/usr/sbin

case "" in
  start)
    echo "Starting $COMMAND."
    $COMMAND &
    ;;
  stop)
    echo "Stoping $PROGNAME."
    killall $PROGNAME
    ;;
  restart)
    
chown root:www-data /etc/init.d/n2n
chmod 774 /etc/init.d/n2n
update-rc.d n2n defaults
 stop
    
vim /etc/init.d/gpio
 start
    ;;
  *)
    echo "Usage: ... {start|stop|restart}"
    exit 1
    ;;
esac
exit 0

set daemon

#!/bin/sh
### BEGIN INIT INFO
# Provides:        gpio
# Required-Start:  $local_fs $syslog
# Required-Stop:   $local_fs $syslog
# Default-Start:   2 3 4 5
# Default-Stop:
# Short-Description: Start gpio
### END INIT INFO

echo "4" > /sys/class/gpio/export
echo "17" > /sys/class/gpio/export
echo "18" > /sys/class/gpio/export
echo "21" > /sys/class/gpio/export
echo "22" > /sys/class/gpio/export
echo "23" > /sys/class/gpio/export
echo "24" > /sys/class/gpio/export
echo "25" > /sys/class/gpio/export

echo "out" > /sys/class/gpio/gpio4/direction
echo "out" > /sys/class/gpio/gpio17/direction
echo "out" > /sys/class/gpio/gpio18/direction
echo "out" > /sys/class/gpio/gpio21/direction
echo "out" > /sys/class/gpio/gpio22/direction
echo "out" > /sys/class/gpio/gpio23/direction
echo "out" > /sys/class/gpio/gpio24/direction
echo "out" > /sys/class/gpio/gpio25/direction

chmod 666 /sys/class/gpio/gpio4/value
chmod 666 /sys/class/gpio/gpio17/value
chmod 666 /sys/class/gpio/gpio18/value
chmod 666 /sys/class/gpio/gpio21/value
chmod 666 /sys/class/gpio/gpio22/value
chmod 666 /sys/class/gpio/gpio23/value
chmod 666 /sys/class/gpio/gpio24/value
chmod 666 /sys/class/gpio/gpio25/value

chmod 666 /sys/class/gpio/gpio4/direction
chmod 666 /sys/class/gpio/gpio17/direction
chmod 666 /sys/class/gpio/gpio18/direction
chmod 666 /sys/class/gpio/gpio21/direction
chmod 666 /sys/class/gpio/gpio22/direction
chmod 666 /sys/class/gpio/gpio23/direction
chmod 666 /sys/class/gpio/gpio24/direction
chmod 666 /sys/class/gpio/gpio25/direction

exit 0

gpio

open

chmod 774 /etc/init.d/gpio
update-rc.d gpio defaults

and paste

echo ' ' > /etc/udev/rules.d/99-remoteqth.rules
chown pi:www-data /etc/udev/rules.d/99-remoteqth.rules
chmod 664 /etc/udev/rules.d/99-remoteqth.rules

enabled with

vim /etc/crontab

udev

# xplanet
*/15 *  * * *   pi      /home/pi/remoteqth/script/azimuth-map.sh
*  *    * * *   pi      ip addr show eth0 | grep inet | awk '{print}' > /tmp/eth0ip
*  *    * * *   root    /home/pi/remoteqth/script/lcd.sh

xplanet

open

ln -s /home/pi/remoteqth/script/.xplanet /home/pi/.xplanet
ln -s /home/pi/remoteqth/script/.xplanet/images/sun.png /usr/share/xplanet/images/sun.png

and paste

sed -i s/DEVICE=\"parport0\"/DEVICE=\"ttyUSB.cw\"/g /etc/default/cwdaemon

symlinks

chown pi:www-data /etc/ser2net.conf
chmod 664 /etc/ser2net.conf

cwdaemon

set config

ser2net

set access

{CODE}

and reboot...