Installation

This revision is from 2013/05/22 02:21. You can Restore it.

From SD card image for RaspberryPI

Download Image file and write to SD card - more here

Server default set to DHCP enable

  • web interface login 'yourcall' and password '1234'
  • server ip address shown on LCD display, or run from console 
    ifconfig
    and read IP address eth0 device (edge0 is vpn device).
  • alternative install Fing to you android phone and find Raspberry device in your private site.

Options:

  • boot with HDMI display and usb keyboard
  • login as pi to shell with password raspberry
  • run 
    sudo raspi-config
    and set expand_rootfs, eventualy enable ssh.

From rsync repository (RaspberryPi)

List of commands for Raspian wheezy after ssh login or local access from console as root (without warranty). This commands also use on other system with small changes, dependency to hardware.

  • On any other linux system change use name pi to your username.

Install need package

sudo su
echo 'remoteqth' > /etc/hostname
apt-get install htop iftop mc vim screen apache2 php5 libhamlib2 libhamlib-utils rsync i2c-tools ser2net python-smbus n2n cwdaemon xplanet xplanet-images rcconf imagemagick gnuplot libqrencode3 libqrencode-dev php5-gd

Download RemoteQTH server repository

mkdir /home/pi/remoteqth
chown pi:pi /home/pi/remoteqth/
rsync -rva --numeric-ids --delete rsync://remoteqth.com:55873/server/ /home/pi/remoteqth/

File access

echo '/home/pi/remoteqth' > /etc/remoteqth-path
chown pi:www-data /etc/remoteqth-path
chmod 664 /etc/remoteqth-path

chown root:www-data /etc/network/interfaces
chmod 664 /etc/network/interfaces

chown root:www-data /etc/resolv.conf
chmod 664 /etc/resolv.conf

i2c (raspberryPi only)

sed -i s/blacklist\ spi-bcm2708/#blacklist\ spi-bcm2708/g /etc/modprobe.d/raspi-blacklist.conf
sed -i s/blacklist\ i2c-bcm2708/#blacklist\ i2c-bcm2708/g /etc/modprobe.d/raspi-blacklist.conf
echo 'i2c-dev' >> /etc/modules

sudo

enter

visudo

and paste

# RaspberryPi
www-data ALL = NOPASSWD: /sbin/shutdown
www-data ALL = NOPASSWD: /sbin/ifconfig
www-data ALL = NOPASSWD: /etc/init.d/ser2net
www-data ALL = NOPASSWD: /etc/init.d/n2n
www-data ALL = NOPASSWD: /usr/sbin/i2cdetect
www-data ALL = NOPASSWD: /usr/sbin/i2cget
www-data ALL = NOPASSWD: /usr/bin/rsync
www-data ALL = NOPASSWD: /home/pi/remoteqth/script/update.sh
# alix1d
www-data ALL = NOPASSWD: /usr/local/bin/ledblink
www-data ALL = NOPASSWD: /usr/local/bin/fcdctl
www-data ALL = NOPASSWD: /usr/local/sbin/remountrw
www-data ALL = NOPASSWD: /usr/local/sbin/remountro

gpio (RaspberryPi only)

open

vim /etc/init.d/gpio

and paste

#!/bin/sh
### BEGIN INIT INFO
# Provides:        gpio
# Required-Start:  $local_fs $syslog
# Required-Stop:   $local_fs $syslog
# Default-Start:   2 3 4 5
# Default-Stop:
# Short-Description: Start gpio
### END INIT INFO

echo "4" > /sys/class/gpio/export
echo "17" > /sys/class/gpio/export
echo "18" > /sys/class/gpio/export
echo "21" > /sys/class/gpio/export
echo "22" > /sys/class/gpio/export
echo "23" > /sys/class/gpio/export
echo "24" > /sys/class/gpio/export
echo "25" > /sys/class/gpio/export
echo "27" > /sys/class/gpio/export

echo "out" > /sys/class/gpio/gpio4/direction
echo "out" > /sys/class/gpio/gpio17/direction
echo "out" > /sys/class/gpio/gpio18/direction
echo "out" > /sys/class/gpio/gpio21/direction
echo "out" > /sys/class/gpio/gpio22/direction
echo "out" > /sys/class/gpio/gpio23/direction
echo "out" > /sys/class/gpio/gpio24/direction
echo "out" > /sys/class/gpio/gpio25/direction
echo "out" > /sys/class/gpio/gpio27/direction

chmod 666 /sys/class/gpio/gpio4/value
chmod 666 /sys/class/gpio/gpio17/value
chmod 666 /sys/class/gpio/gpio18/value
chmod 666 /sys/class/gpio/gpio21/value
chmod 666 /sys/class/gpio/gpio22/value
chmod 666 /sys/class/gpio/gpio23/value
chmod 666 /sys/class/gpio/gpio24/value
chmod 666 /sys/class/gpio/gpio25/value
chmod 666 /sys/class/gpio/gpio27/value

chmod 666 /sys/class/gpio/gpio4/direction
chmod 666 /sys/class/gpio/gpio17/direction
chmod 666 /sys/class/gpio/gpio18/direction
chmod 666 /sys/class/gpio/gpio21/direction
chmod 666 /sys/class/gpio/gpio22/direction
chmod 666 /sys/class/gpio/gpio23/direction
chmod 666 /sys/class/gpio/gpio24/direction
chmod 666 /sys/class/gpio/gpio25/direction
chmod 666 /sys/class/gpio/gpio27/direction

exit 0

enabled with

chmod 774 /etc/init.d/gpio
update-rc.d gpio defaults

udev

echo ' ' > /etc/udev/rules.d/99-remoteqth.rules
chown pi:www-data /etc/udev/rules.d/99-remoteqth.rules
chmod 664 /etc/udev/rules.d/99-remoteqth.rules

xplanet

open

vim /etc/crontab

and paste

# xplanet
*/15 *  * * *   pi      /home/pi/remoteqth/script/azimuth-map.sh
*  *    * * *   pi      ip addr show eth0 | grep inet | awk '{print}' > /tmp/eth0ip
# RPi only
*  *    * * *   root    /home/pi/remoteqth/script/lcd.sh
*  *    * * *   pi      /home/pi/remoteqth/script/webcam.sh

symlinks

ln -s /home/pi/remoteqth/script/.xplanet /home/pi/.xplanet
mkdir /usr/share/xplanet/images
ln -s /home/pi/remoteqth/script/.xplanet/images/sun.png /usr/share/xplanet/images/sun.png

cwdaemon

set config

sed -i s/DEVICE=\"parport0\"/DEVICE=\"ttyUSB.cw\"/g /etc/default/cwdaemon

ser2net

set access

chown pi:www-data /etc/ser2net.conf
chmod 664 /etc/ser2net.conf

Ramdisk

Source 1

sudo vim /etc/fstab

rule

tmpfs           /tmp              tmpfs   defaults,noatime,mode=1777 0       0
tmpfs           /var/log          tmpfs   defaults,noatime,mode=0755 0       0

create

sudo vim /etc/init.d/prepare-dirs

and add

#!/bin/bash
#
### BEGIN INIT INFO
# Provides:          prepare-dirs
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Required-Start:  
# Required-Stop:  
# Short-Description: Create /var/log/apache2 directory on tmpfs at startup
# Description:       Create /var/log/apache2 directory on tmpfs at startup
### END INIT INFO
 
DIR=/var/log/apache2
 
#
# main()
#
case "${1:-''}" in
  start)
    # create the /var/log/apache2 needed by webserver
    if [ ! -d ${DIR} ]; then
      mkdir ${DIR}
      chmod 755 ${DIR}
    fi
    ;;
  stop)
    ;;
  restart)
   ;;
  reload|force-reload)
   ;;
  status)
   ;;
  *)
   echo "Usage: $SELF start"
   exit 1
   ;;
esac

enable

sudo update-rc.d prepare-dirs defaults 01 99

RaspiCam

raspistill (by m1m1 ยป Fri May 17, 2013 12:01 pm) from git, source 2