Installation

This revision is from 2013/05/22 02:27. You can Restore it.

From SD card image for RaspberryPI

Download Image file and write to SD card - more here

Server default set to DHCP enable

  • web interface login 'yourcall' and password '1234'
  • server ip address shown on LCD display, or run from console 
    ifconfig
    and read IP address eth0 device (edge0 is vpn device).
  • alternative install Fing to you android phone and find Raspberry device in your private site.

Options:

  • boot with HDMI display and usb keyboard
  • login as pi to shell with password raspberry
  • run 
    sudo raspi-config
    and set expand_rootfs, eventualy enable ssh.

From rsync repository (RaspberryPi)

List of commands for Raspian wheezy after ssh login or local access from console as root (without warranty). This commands also use on other system with small changes, dependency to hardware.

  • On any other linux system change use name pi to your username.

Install need package

sudo su
echo 'remoteqth' > /etc/hostname
apt-get install htop iftop mc vim screen apache2 php5 libhamlib2 libhamlib-utils rsync i2c-tools ser2net python-smbus n2n cwdaemon xplanet xplanet-images rcconf imagemagick gnuplot libqrencode3 libqrencode-dev php5-gd

Download RemoteQTH server repository

mkdir /home/pi/remoteqth
chown pi:pi /home/pi/remoteqth/
rsync -rva --numeric-ids --delete rsync://remoteqth.com:55873/server/ /home/pi/remoteqth/

File access

echo '/home/pi/remoteqth' > /etc/remoteqth-path
chown pi:www-data /etc/remoteqth-path
chmod 664 /etc/remoteqth-path

chown root:www-data /etc/network/interfaces
chmod 664 /etc/network/interfaces

chown root:www-data /etc/resolv.conf
chmod 664 /etc/resolv.conf

i2c (raspberryPi only)

sed -i s/blacklist\ spi-bcm2708/#blacklist\ spi-bcm2708/g /etc/modprobe.d/raspi-blacklist.conf
sed -i s/blacklist\ i2c-bcm2708/#blacklist\ i2c-bcm2708/g /etc/modprobe.d/raspi-blacklist.conf
echo 'i2c-dev' >> /etc/modules

udev

echo ' ' > /etc/udev/rules.d/99-remoteqth.rules
chown pi:www-data /etc/udev/rules.d/99-remoteqth.rules
chmod 664 /etc/udev/rules.d/99-remoteqth.rules

xplanet

open

vim /etc/crontab

and paste

# xplanet
*/15 *  * * *   pi      /home/pi/remoteqth/script/azimuth-map.sh
*  *    * * *   pi      ip addr show eth0 | grep inet | awk '{print}' > /tmp/eth0ip
# RPi only
*  *    * * *   root    /home/pi/remoteqth/script/lcd.sh
*  *    * * *   pi      /home/pi/remoteqth/script/webcam.sh

symlinks

ln -s /home/pi/remoteqth/script/.xplanet /home/pi/.xplanet
mkdir /usr/share/xplanet/images
ln -s /home/pi/remoteqth/script/.xplanet/images/sun.png /usr/share/xplanet/images/sun.png

cwdaemon

set config

sed -i s/DEVICE=\"parport0\"/DEVICE=\"ttyUSB.cw\"/g /etc/default/cwdaemon

ser2net

set access

chown pi:www-data /etc/ser2net.conf
chmod 664 /etc/ser2net.conf

RaspiCam

raspistill (by m1m1 ยป Fri May 17, 2013 12:01 pm) from git, source 2