CW

This revision is from 2014/06/02 01:54. You can Restore it.

Allows play CW macros from web interface. It eliminates the effects of CW during transmission through the Internet.

You have a choice of two types of keying on the server side.

CW daemon

Software keying by the Linux daemon - generates keying directly from server. CW daemon listens on UDP port 6789 (for keying with linux logs, CQRlog, Tucnak...)

What you need

  • USB/UART converter
  • Transistor or optocoupleer to DTR/RTS output from CW/PTT keying (you can also use k3ng keyer - in our involvement allows dtr/rts keying)

Settings

  • USB Vendor id: must have at 4 characters.
  • USB Product id:must have at 4 characters.
  • USB sn: must have at least 1 characters, and maximum 8 characters.
  • CW memory name/content: if sets mem name as n/a, this memory don't show in controll page.

Arduino K3NG CLI

Hardware keying from Arduino (firmware by K3NG) connected via USB and export to TCP post via ser2net.

For finding id's and serial numbers USB device you can use a pop-up window on top of page. This window print dmesg message from kernel of system, After plug usb device you see