Outdoor GPS module FGPMMOPA6H
This revision is from 2017/12/22 00:39. You can Restore it.
Outdoor GPS with FGPMMOPA6H chip as time source with 1PPS for Open Interface III
Hardware
C1,C3,C5 | C_0805 | piece 3 | capacitor 100n |
C2 | C_0805 | piece 1 | capacitor 10u |
C4 | C_0805 | piece 1 | capacitor 4u7 |
R2 | C_0805 | piece 1 | resistor 100R |
R1,R8,R9 | C_0805 | piece 3 | resistor 330R |
R13 | C_0805 | piece 1 | resistor 470R |
R3,R5,R6,R7 | C_0805 | piece 4 | resistor 680R |
R12 | C_0805 | piece 1 | resistor 1k |
R10,R11 | C_0805 | piece 2 | resistor 10k |
R4 | C_0805 | piece 1 | resistor 1M |
L4,L5 | Inductor_1210 | piece 2 | Inductor10uH |
L1,L2,L3,L6,L7,L8 | C_0805 | piece 6 | Ferrite bear |
D4,D1,D2,D3,D5,D6,D7 | SOT-23 | piece 7 | BAV99.215 |
U1 | SOT-23 | piece 1 | MCP1703T-3302E/CB |
Q1,Q2 | SOT-23 | piece 2 | MMBF170LT1G |
U2 | LSF0102 | piece 1 | LSF0102 |
P1 | Pin_Header_Straight_1x05 | piece 1 | CONN_01X05 |
U3 | PA6H-GPS | piece 1 | PA6H-GPS |
J1,J2 | RJ45-LED-straight | piece 2 | RJ45-LED |
J3 | SMA_THT_Jack_Straight | piece 1 | SMA (optional) |
BT1 | Batt-VL1220 | piece 1 | Li 3V |
How to connect to Open Interface III
- ACC1 - TXD
- ACC2 - GND
- ACC3 - RXD
- ACC16 - 1PPS
- ACC18 - PWR
Firmware
Open Interface III
Enable set to 1, with line
boolean GpsTime = 1; // External GPS via ACC