Manual IP switch II

This revision is from 2019/01/25 08:24. You can Restore it.

Manual IP switch MK2 is delivered with two parts - IP relay diver KIT (needs to assemble) and assembled IP control. Both parts have firmware installed and automaticaly pair in local network with available DHCP server.

Quick start guide in two step

Manual IP switch is consists of two parts

IP Switch relay driver KIT

Assembly KIT by this instructions.
Connect ethernet to local LAN with available DHCP server
Connect 5V power DC adapter
Set NET-ID-sufix with BCD switch in the range 0-7, for example 0.

IP control

This part is assembled and tested.
Connect ethernet to local LAN with available DHCP server
Set NET-ID-sufix with bottom side BCD switch in the range 0-7, the number must be the same as on IP-switch relay driver.
Connect micro USB cable for power supply.
Wait to pair and start to use.

The hardware

IP Switch relay driver KIT is on its own page.
IP control

1 - rotary Encoder switch one from 2-16 outputs
2 - status LCD display

Points in the first row indicate the scope of the encoder.

3 - NET-ID BCD, switch sufix in range 0-7
4 - 25 pin D-SUB (inputs outputs not use)

PIN-1 DC power, typicaly 13,8V from transceiver
PIN-18 PTT input
PIN-14 GND

5 - Ethernet
6 - micro USB for upload firmware or power
7 - eight light button - light after receive confirming from remote relay

Circuits

Based on universal NANO module

And expanding light keypad

Pinouts 25 pin D-SUB

pin-1	in	Input power 8-18V DC from Transceiver
pin-2	in	ICOM CI-V
pin-3	out	TXD TTL
pin-4	out	TXD TTL inverted
pin-5	out	TXD 232 level
pin-6	out	PTT output
pin-7	out	Relay 2
pin-8	out	Relay 4
pin-9	out	Relay 6
pin-10	out	Relay 8
pin-11	in/out	BCD4
pin-12	in/out	BCD2
pin-13	in	AZ
pin-14	-	GND
pin-15	in	RXD TTL
pin-16	in	RXD TTL inverted
pin-17	in	RXD 232 level
pin-18	in	PTT in
pin-19	out	Relay 1
pin-20	out	Relay 3
pin-21	out	Relay 5
pin-22	out	Relay 7
pin-23	out	+5V
pin-24	in/out	BCD3
pin-25	in/out	BCD1
shield	-	GND